标识体系的功能性能够到达“此时无声胜有声”的辨认作用，标识体系的美观性使其最终的视觉作用要与其所在的人文环境相调和习惯。优异的标牌能够辅佐标识体系提高全部公司，医院，校园，景区，酒店的文明。那么怎样才能制造出优质的标牌呢？大印象对济南标识制作技术提出几个要求，以协助标识公司提高本身制造技术水平，以及协助需求制造标识的公司辩别出优、劣质标牌。
The function of marking system can reach the recognition function of "the silent voice", and the beauty of the system makes its final visual function and the human environment. Excellent signs to assist the identification system to improve all the companies, hospitals, campuses, scenic spots, the hotel's civilization. So how can we make a good sign? Dayinxiang proposed several requirements on production technology of Ji'nan logo, to assist the company logo itself to improve the manufacturing technology level, and to help identify the companies manufacturing needs to discriminate the advantages and inferior signs.
1、铝合金型材请求：
1, aluminum alloy profiles:
铝合金型材和常用塑胶资料配件应契合铝合金标牌型材的质量请求。
Aluminum alloy profiles and commonly used plastic parts should be in conjunction with the quality requirements of aluminum alloy plate.
铝合金型材的角底偏向少于正负偏向1度。
The angle of the aluminum alloy profile is less than 1 degrees of positive and negative.
平面间隙<=0.4%*B(B为型材宽度)。
Plane gap <=0.4%*B (B for profile width).
2、亚克力标牌加工的请求：
2, acrylic plate processing request:
亚克力出模热弯成形，尺度及形状共同，外表无气泡及划痕。
Acrylic mold hot bending, scale and shape, appearance no bubbles and scratches.
热弯成形后外表通过粗砂、细砂、碾磨处理，确保其外表滑润无台阶。
Hot bend forming appearance by coarse sand, fine sand, grinding processing, ensure its smooth appearance without steps.
完成后外表光泽柔软均匀、无颗粒状物、无气泡、透光均匀。
After the completion of the surface gloss soft, uniform, no particles, no bubbles, light transmittance.
3、不锈钢工艺请求：
3, stainless steel process request:
不锈钢板须刨坑折弯焊接（不锈钢板须先刨坑后折弯，以保证边缘挺拔度）；保证折弯处圆弧角R＜1MM。
Stainless steel plate shall be bent and welded (stainless steel plate shall be bent before the pit, to ensure that the edge of the edge); to ensure the bend at the corner of the arc R < 1MM.
焊接前肃清外表油污，减少焊缝构成的虚焊、气孔、裂纹等缺陷。
Before welding to eliminate the appearance of oil, which reduce the weld weld, porosity, cracks and other defects.
焊接完后将一切可见焊缝打磨润滑，与四周外表一样平滑，无明显划痕。
After welding the weld will be visible to all visible lubrication, and the surrounding surface as smooth, no obvious scratches.
4、烤漆技术请求：
4, paint technology request:
清洁外表残留物，补灰，打磨等一系列外表处理。
Cleaning surface residues, dust, grinding and a series of surface treatment.
选用环保型优异油漆烤漆处理。烤漆房须无尘土颗粒车间，烤漆外表涂层三涂三烤处理，涂层厚度大于或等于35微米。
Excellent selection of environmental protection type paint paint processing. Paint room dust particles to workshop, paint coating three coated three baking treatment, coating thickness is greater than or equal to 35 microns.
油漆色彩要契合规划方案请求。
Paint color to meet the planning program request.
面漆膜应滑润、均匀，不允许呈现流痕、皱纹、桔皮、气泡、搀杂等影响装修作用的缺点。
Finish should be smooth, uniform film, are not allowed to present flow marks, wrinkles, orange peel, bubbles, mixed effects of the decoration effect of the disadvantages.
5、丝印工艺请求：
5, silk screen printing process request:
菲林冲制网版，丝印外表用酒精或白电油将外表清算洁净。
Fei Lin for the screen, screen appearance with alcohol or white oil will look clean.
丝印颜色要契合设计计划请求，字体及图案笔划明晰，无变形、锯齿等缺陷。
Printing color to fit the design request, characters and patterns of strokes clear, no deformation, teeth and other defects.
丝印图形文字颜色与底色比照无明显浸透现象。
The text color and background color screen graphics with no obvious phenomenon.
6、竣工外观请求：
6, the final appearance of the request:
装置完成后标识牌外观精巧，外表无螺钉，无划痕、气泡及显着的色彩不均匀，烤漆须无显着色差，所用资料契合规划方案请求。
Device after the completion of signage exquisite appearance, appearance without screws, no scratches, bubbles and significant uneven color, paint should be no significant difference, the data fit plan request.
7、一切标识系统的图形应契合“GB10001公共信息标志用图形符号”最新的规则要求；
7, all logo system graphics should be fit with the "GB10001 public information symbols with graphical symbols" the latest rules requirements;
8、标识体系的中英文字应契合国家和收购单位有关规范的规则，规范中没有的，译文需经规划单位和收购单位承认；一切标识标牌的中英文文字、色彩等在制造前，均需书面提交收购单位承认后方可施行；
8, the English word identification system should be in conformity with the state and the acquisition of relevant units of the rule, there is no specification, the required by the planning unit and the acquisition unit all signs of recognition; English text and color before fabrication, are required to submit a written approval prior to the implementation of the acquisition unit;
9、标识系统本体的各种金属型材、部件，连同内部型钢骨架，应满足国度有关设计请求（应契合抗风载荷的请求），保证强度；收口处应作防水处置；
9, the body identification system of various metal material and parts, together with internal steel frame, should meet the design request of relevant state (should be consistent with the wind load, guarantee the request) should be close in strength; water treatment;
10、标识体系必须确保装置结实，拆装便利。一切标识标牌体系的装置挂件、螺栓均应镀锌防腐处理。一切标识体系的装置，需与其它设备密切配合，不留危险；
10, marking system must ensure that the device is strong, easy to assemble and disassemble. All the signs system of the device hanging, bolts should be galvanized anti-corrosion treatment. The equipment of all marking system, need to cooperate closely with other equipment, do not leave the danger;
11、标识系统采用型材的局部，其切口不应留有毛刺、金属屑及其它污染物；
11, marking system using the part of the profile, the incision should not be left with burr, metal debris and other pollutants;
12、标识体系制品的外表，不论是原有外表或有其它涂复层，其外表均不得有划痕和碰损；
12, marking the appearance of the system products, whether the original appearance or other coating layer, its appearance is not a scratch and touch;
13、一切标识系统均应思索装置及检修的便当；
13, all identification system should think about the equipment and overhaul of the lunch box;